F.03 · Core Field

Civil, Landscape & Site Utility Modeling

Everything outside the building line, modeled as one thing rather than three. Grading surfaces, roadways, and earthwork in Civil 3D; hardscape, planting, and site amenities built onto those surfaces rather than drawn beside them; and the underground network - water, storm, sewer, and external fire-fighting mains - modeled with inverts and crossings resolved. Site work modeled next to the building instead of with it is where a surprising amount of field rework comes from.

Scope

Grading, roadways, earthwork; hardscape, planting, site amenities; underground and external utility networks - federated into one site model.

Deliverables
Grading surfaces, roadway, parking, and earthwork model in Civil 3D
Cut/fill quantities taken from the modeled surfaces
Hardscape model: paving, walls, steps, ramps, and site furniture
Planting areas and site amenity elements, reconciled with the utilities below
Site utility network: water, storm, sewer, and fire-fighting mains with manholes, inverts, and cover levels
Utility crossings and clearances resolved against each other and the building
One federated site model on the project's shared coordinate system
Shop Drawings Included
Utility layouts and profiles
Sections and manhole details
Layout and material plans
Installation drawings
How This Scope Runs

Process

  1. 01

    Survey and intent review

    Survey data, civil and landscape drawings, existing service records, and the coordinate system standard are confirmed first.

  2. 02

    Surface modeling

    Existing and proposed surfaces, roadways, and earthwork built in Civil 3D.

  3. 03

    Hardscape and planting

    Paving, walls, steps, amenities, and planting areas modeled onto the graded surfaces.

  4. 04

    Utility network and crossings

    Water, storm, sewer, and fire-fighting networks modeled with inverts and structures; crossings, clearances, and cover depths resolved.

  5. 05

    Federation, QA/QC and handoff

    The site model tied into the shared coordinate system and referenced into the federated model, with the coordinate basis documented.

Software Used
Civil 3DRevitNavisworksAutodesk FormaBIM 360/ACC
Who It's For
  • Civil and site engineers needing modeling capacity
  • Landscape architects needing modeling and documentation capacity
  • General contractors sequencing excavation and utility installation
  • Developers and owners on campus or multi-building sites
FAQ

Common questions

A single shared coordinate system, confirmed at kickoff and documented at handoff. It is the one decision that decides whether federation works later.

STRATA models design intent supplied by your architect or engineer of record. We are not the architect or engineer of record on your project, and we do not stamp or seal drawings.

Ready to coordinate your next project?

Send your disciplines, LOD target, and project location. We come back with scope and next steps within 24 business hours.

STRATA BIMSTRATA BIMThe Layers Behind Better Building

STRATA BIM is a specialty BIM modeling and coordination firm serving architects, engineers, general contractors, and owners across architectural, structural, civil, landscape, MEPF, and site utility scopes, delivering up to LOD 400.

business@stratabim.com
Core Fields
Company
© 2026 STRATA BIM. All rights reserved.Standard modeling capability: up to LOD 400, across every discipline.